What are the best ways to clean plastic?
- Baking soda and water-based paste – mix baking soda and water to create a paste to clean your plastic products.
- Rubbing Alcohol – let rubbing alcohol sit in your plastic container for a few minutes, then rinse properly with water.
- Bleach – a simple mixture of bleach and water can remove stains on plastic products.
- Vinegar – put water and vinegar mixture in a spray bottle, and then spray to your plastic products.
- Lemon Juice – rub lemon juice on your plastic product, and then leave it under the sun for 1-2 days.
Plastic products created from injection molding machines are perhaps the most common types of products around. There is a high chance that you are even viewing this article through a device, which has parts that were produced from injection molding machines. Plastic has become such a common product, that an injection mold in China and the United States is a very valued material in the manufacturing industry.
Like all kinds of solid materials, plastic also wears down after frequent usage, and can experience discoloration and damage. While plastic is one of the more durable materials being used in different kinds of products, it is always important to maintain and clean them so that you would be able to use them longer. With that in mind, here are the best ways to clean and maintain plastic products:
Baking soda and water
One simple and effective cleaning method can be made using something that you can usually find at home. Mix three tablespoons of baking soda and a tablespoon of water, and you would be able to create a cleaning paste that has the same consistency as toothpaste. To spread it on plastic, it is best to use a toothbrush or a cleaning cloth, so that you would be able to rub the paste on some tight areas, where dirt and grime would be present.
After applying the paste, let it sit for around thirty minutes, which helps catch the dirt. After the paste settles in, use a wet cloth to wash off the paste and rinse the plastic. While rinsing, use liquid soap or dishwashing liquid to clean the plastic more. After cleaning, dry using cloth, and sit it out for a few more minutes. This would help keep your plastic shiny and dirt-free, and is a method that you do not need to spend too much money on. This is effective in different kinds of plastic made from an injection mold in China or the United States, which means it is one of the safest methods around.
Rubbing Alcohol
For food containers made from injection molds in China and the United States, you would most likely encounter a good amount of stains that come from different kinds of food. This can cause a good amount of discoloration, and can even make your food containers smell unpleasant. The simplest solution is to use alcohol to rub these stains off, or by letting some alcohol sit in the container for a few minutes. This would help you remove all of the stains, so that you would be able to rinse it with water.
Bleach
If you want a thorough way to clean your plastic, using a simple mixture of one tablespoon of bleach (or more depending the size of the container you would be putting the solution in) and water in a tub would be very effective in removing some dirt and stains that are tough to handle. While doing this, make sure that you are wearing protective gloves, as bleach is a strong chemical that can irritate the skin.
Let the plastic sit in the mixture for around ten minutes, so that you will be able to loosen up and remove some stains and dirt. Once it has set in, remove the plastic from the tub and rinse and scrub it using water and soap. After rinsing, let the plastic dry up for around thirty minutes. While this might not be the safest method, given that you need to wear protection, this is very effective, since bleach is a strong liquid that can hurt your skin.
Vinegar
While vinegar is commonly used in food, it can also be used to clean up plastic effectively. Grab a spray bottle, and mix one part water with one part vinegar, and spray the mixture on the plastic. Vinegar is effective in removing different kinds of dirt, grease, and mildew, which can be tricky to remove using water. After spraying, wipe the plastic with vinegar until the dirt has been removed. The final step is to rinse the water and dry with cloth, and see the results. This is another affordable solution, that would help you clean plastic products easily, and is something that you can use repeatedly. Truthfully, there’s a lot that vinegar could do.
Lemon
As unlikely as it may be, the juice coming from the lemon is quite an effective plastic cleaner. Simply rub some lemon juice on the plastic, and leave it under the sun for around a day or two. This works best for plastic products that have a lot of hard to remove stains and discoloration. It can even remove some bacteria.
Key Takeaway
Plastic is one product that is constantly around us on a daily basis, and it is important to make sure that we are able to clean and maintain it properly. With these simple and effective methods, you would be guaranteed that you would be able to have clean USA plastic products for you to use.
